Features:
WHY VULCAN WELDING MACHINE ? :-
| VULCAN Welding Machines (Transformers) | Other Welding Machines |
1 | CORE: Graded Silicon Steel | Assorted scrap silicon Mixed with CRC sheet for Low costing |
2 | sufficient Core to give full output | Smaller core not sufficient to give full output |
3 | Pure Electrolyte Metal (99.9%) Used in Winding | Impure Metal Used for Low Costing |
4 | Proper density conductor for sufficient output current | Insufficient output due to under density conductor. |
5 | Regulator Type, Step less for full Range of current control. | Stud type for fixed step range of current control (Tap Change) |
6 | Reliable Dynamic output current for Low Spatter | Not full and Proper output |
7 | Save Electricity, Due to its Low no Loads Currant & Mains on-off Switch | No Main on-off switch, Consumption of Higher Electricity |
8 | Rust Proof, Phosphating & Epoxy Powder coated for Rust Free Long Life Cabinet | Normal CRC sheet with normal paint without cleaning process. |
9 | Coil varnishing by vacuum pressurized impregnating Varnishing system with oven backed Varnished Coating, for high quality Insulation. | Normal Deeping Method with Natural Air Drying Varnish Used for Low cost. |
PARTICULARS | UNITS | RH30FF | RH40FF | RH608FF |
Input Supply | Volts | 380 -415 | 380 -415 | 380-415 |
Phase |
| 1 (2 lines of 3 phase supply) | 1 (2 lines of 3 phase supply) | 1 (2 lines of 3 phase supply) |
Frequency | Hzs. | 50 | 50 | 50 |
Open Circuit Voltage (OCV) | Volts | 60 | 60 | 80 |
Insulation | Class | F | F | F |
Welding Current Range | Amps. | 300 | 400 | 600 |
Max. Continuous Hand Welding | Amps. | 220 | 220 | 220 |
Cooling |
| Forced Air Cooled | Forced Air Cooled | Forced Air Cooled |
Max. Dimensions (Approx) MM | L x W x H | 785 x 500 x 660 | 910 x 560 x 710 | |
Weight (Approx) | Kgs. | 105 | 125 | 165 |
Confirm To |
| IS 1851 -1997 |
CANARY ELECTRICALS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |